User Guide

05
2.1 Injection pipe installation
2.2 Drain pipe installation
Insertion installation
The injection pipe connects to the injection valve of dishwasher and the corner valve of
pipe or tap. The injection pipe is supplied with the dishwasher. Attention: Please use the
supplied new injection pipe to connect with tap and valve. The old and damaged pipe
may cause water leakage.
Attention: When injecting water from the tap, please put the plastic stopper on the suction
port to avoid water leakage.
Tap
(Back diagram)
Injection pipe
Injection pipe
Injection valve
Plastic stopper
Injection pipe
connects with
the valve
2.2.1 Put the ferrule on the drain pipe, the pipe onto correspond port and lock the drain
pipe with ferrule.
2.2.2 When insert the dishwasher into cabinet, put the drain pipe through the hole on
the wall of cabinet.
2.2.3 For insertion installation, the top of drain pipe should be placed above the water
detector port.
2.2.4 Insert the drain pipe into the port of the water detector.
Ferrule
Drain pipe
Back of the
dishwasher
Dishwasher
Drain pipe
Interior radius: 4cm
Insertion length
≥28cm
Sewerage
Wall socket