User Guide

15
Problem Possible cause Potential solutions
The Faucet icon shines
when using the manual
injection.
The Faucet icon shines
when using the automatic
injection.
It takes much longer to inject
automatically.
Impact sounds emit during
operating
It is normal phenomenon of injecting
automatically.
Inappropriate placement of tableware
causing the spray arm hitting with tableware.
Take out tableware and put it back to correct
position according to the "Tableware placement
introductions".
Add water into the container and make sure the
pipe is immersed in the water.
Buttons are not functioning
except On/Off button
Tableware is still wet
The dishwasher makes
"woo~woo" sound when it is
plugged while "FAN" icon
shows in the screen
The power button does not
work
1. Tableware is not placed correctly as
they may be stacked up.
3. The program it ran was Rapid/ Fruit.
3. The Child lock function may be on.
1. The door is open.
Make sure the door is shut.
Keep your hands and buttons dry and clean.
Unlock the child lock.
Contact customer service.
Make sure the tap is on with running water.
Contact customer service for help.
Contact customer service for help.
Clean the filter of the suction pipe.
Contact customer service for help.
4. Did not choose the Preserve function.
4. Press the button too short.
2. The washing process has not done yet.
2. There is water or oil on the button or
hands.
1. The tap is not open or the water stops
running.
1. There is no water in the water tank or
the pipe is not immersed in the water.
2. The flow meter malfunctions.
2. The filter of suction pipe is blocked.
3. The flow meter malfunctions.
3. The injecting valve malfunctions.
2. Oil or water is on the finger or button.
3. The Child lock function may be on.
4. PCB of door lock malfunctions
Refer to the "Tableware placement introductions".
Wait for the process to complete.
There is no drying procedure in these two programs.
Please plug the appliance into the grounded , functional
socket and make sure its voltage corresponds to the
mains.
Clean the button or hand and keep them dry.
1. The button does not work while all of
the display icons are not on. The
possible reason is that the appliance
is not plugged in or the electricity
goes out.
To restart the dishwasher and run the Preserve
program.
The air circulation system is working. It is a normal procedure of dishwasher.
Press the button for 1 second to start.
Unlock the child lock.