User Guide

07
3. Dishwasher fixation and placement
Installation diagram
Check following conditions after installation:
Kindly reminder:
1. Keep the user manual and accessories for further use.
2. Every appliance have passed the water test in factory. It is normal if you found some
water leave in appliance. Please feel free to use it. Use the rapid cleaning program 2-3
times before first household use.
Ventilator at the bottom
(550×50 mm)
3.1 Place the dishwasher levelly in
case of triggering overflowing and
electricity leakage. The ventilator
showed in the figure should not be
placed on the rug.
3.2 Adjust the balance of the appliance
by rotating the adjustable
screw.(Rotate clockwise to elevate
and counterclockwise to lower)
3.3 Fix the appliance with screws on both side after inserting it into the cabinet
and leveling.
Remove the lid on both
sides of the appliance for
putting screws on them.
①
Put a screw through the
fixing hole on the sides of
appliance and fix it onto
plates of the cabinet.
②
Put lids back on the screws.
③
1. Whether the dishwasher is placed levelly and fixed well.
2. Whether the power cord is connected and plugged into grounded socket.
3. Whether the drain and injection pipe is connected well.
4. Whether protective materials and accessories inside are removed completely.