Use and Care Manual

7
4
15
16
≥60℃
CLEANING AND MAINTENANCE
Cleaning the Filter Device
1
Press the dust cup release button and remove the dust cup.
2
After taking out the dust cup, take out the pre-filter and filter sponge.
6
Reinstall the dust cup, first step to align the bottom part
then push the top part until hearing "lock" sounds
3
Clean the pre-filter, filte sponge under water.
Air dry at least 24 hours before reinstalling.
Wet
Dry
5
Assemble the pre filter, filter sponge back. Do not assemble them until
completely dry.
CAUTION:
If you find that the suction is weak or the “Suction Blockage Indicator" on the LED screen
flashes, then please wash the filter.