Instruction Manual

◆Unplug the power cord.
◆Hold the lid handle tightly by hand, turn the lid counterclockwise to the open position, and then raise the lid to
take out the food. (See P1A, P1B, P2)
6. Attention
(1). Do not use this device near flammable substances or in wet environment.
(2). The height of the food and water put in the inner pot must follow the step 2 of the Operating Instructions.
(3). Be careful to protect the Silicone ring. Please do not replace it with other rubber ring or use tension ring to
increase the seal.
(4). The Food blocking cap should be cleaned frequently and the Pressure release valve should be checked
frequently to ensure that it is not blocked.
(5). Please do not force the cap open before the Floating valve falls.
(6). Do not add any weight to the Pressure release valve or replace it with something else.
(7). Do not use a cloth to block the area around the lid of the pot and the buckle of the outside pot, so as not to affect
the safety performance.
(8). The contact surface between the bottom of the inner pot and the heating plate should be kept clean. The inner
pot cannot be placed on other heat sources and cannot be replaced by other pots.
(9). The inner pot is coated. to prevent scratches, please use a wooden or plastic rice spoon.
(10). Please do not put your hand or face near the exhaust pipe when the Pressure release valve is exhausting. Please
do not touch the shell during work to avoid burns.
(11). After cooking finish, the device will enters the Warm function automatically, and the keep warm time should not
exceed 6 hours, so as not to affect the cooking effect.