Instruction Manual

(4) Continue turning “Select”knob clockwise, "Pressure" gets flashing, then press“Select”knob to enter the
"Pressure" option zone:
①“Low”— Choose low pressure 50kpa cooking
②“High”—Choose high pressure 80kPa cooking
③“Off”—Choose stress-free cooking
(5) When “Low” or “High” pressure cooking is chosen, “Temp” options do not display；when“Off” pressure
cooking is chose, press the “Select”knob to save and jump to the temperature “Temp” setting. Press the
“Select”knob again, one of the four temperature option will flash. When the “Select”knob is turned to
“Manual”，the preset temperature value will be displayed in the digital zone. To adjust the temperature value,
please press the “Select”knob, turn the “Select”knob clockwise and counterclockwise to adjust the temperature
value when the digital zone gets flashing. After the adjustment, press the “Select”knob, save and exit the current
settings and return to the menu functional zone.
(6)The remaining three menu functions: “Delay”“Sear”“Warm” all have "On" and "Off" options, and the
setting method is the same as above.
◆Unique cooking method: “Stew first, Fry after”:
(1) Most pressure work menus have a built-in "Sear" feature, which allows you to use pressure to cook food and
then make it fried and more juicy.
(2) When the user has selected "Pressure" as "Low" or "High" and selected "Sear" as "On", press "Start" to enter
the working status. When the holding time is over, the LCD screen will flash and wait for the countdown for 10
minutes. At the same time, all the "bibi-bibi-bibi..."sound are the prompt tones. At this point, the user should
immediately press the Pressure release button to quickly exhaust and open the lid. (For cooking liquid food, it is
recommended to put a wet cloth on the lid to cool down and reduce the pressure instead of pressing the Pressure
release button to exhaust). After opening the lid of the pot, press the “Select”knob again, then continue to execute
the "Sear" function according to the preset program.
(3) If the user does not open the lid within 10 minutes, the system will skip the "Sear" function and enter the
insulation function if warm function is set. If the warm function is not set, the work is done which means the screen
will display "End" and make the sound "BiBiBi" three times.
Preset guide:
(See attachment ：“Cooking programs”)
⑧ Open the lid and take out the food.
◆When cooking is finished and "End" is displayed on the screen, you can open the lid and take out the food by
following methods:
◆Press Cancel to return to standby status;
◆Press the Pressure release button to let the Pressure release valve exhaust until the Floating valve falls; After
exhausting, press "OFF" button, " Pressure release valve " and “Pressure release button” will be reset (See P9, P10,
P11).
◆Warning: If you are cooking liquid food (porridge, sticky liquid), do not exhaust immediately after cooking. It must
be cooled naturally until the Floating valve falls, otherwise the food will be ejected from the exhaust pipe.