Instruction Manual

“click”sound will be heard the lid is closed properly. (See P7A, P7B, P7C)
⑤ Set Pressure release valve. Check whether the Pressure release valve is in the sealed status, (Otherwise, press OFF
button to restore the Pressure release valve to the sealing status)，and check if the Floating valve has fallen (The
Floating valve should remain in a falling status before heating) (See P8).
⑥ After plugging the appliance，“Custom Cook ” menu will flash with LCD display showing“ 00：30 ” which
means the appliance is in standby mode.
Attention: When the lid of the pot is not closed properly, LCD screen will display
and the pressure cooker
won’t work. When the lid of the pot is rotated to the properly position, the "
" icon disappears and the pressure
cooker will work normally.
⑦ Control panel
◆“Start”
Press“Select”to choose Menu function， then press “Start” to enter the working status.
◆“Cancel”
(1) Press“Cancel” in the working status to cancel the current work and return to standby status；
(2) In the process of setting a certain level, press “Cancel”to cancel the current setting and return to the previous
level. You can press “Cancel” until you finally return to the Main menu.
◆ “Select”
(1) When a menu flashes in the panel menu area, turn the “Select” knob left or right to select the desired menu.
After selecting the menu, press the “Select” knob to enter the menu function area of the LCD screen.
(2) The menu function area includes digital zone
.
Pressure control – Pressure (including three options of "Low", "High" and "Off").
Temperature control - Temp (including four options of "Low", "Medium", "High" and "Manual")
Delay timer - Delay (including two options of "On" and "Off")
High temperature heating - Sear (including two options of "On" and "Off")
Keeping warm - Warm (including two options of "On" and "Off").
These menu functions have different combinations depending on the menu selected. (Illustrated below with the
"Custom Cook" menu)
(3) When the horizontal line “——” below the digital zone flashes, it means that the digital zone is selected. Press
the“Select”knob with digital zone flashes. Turn the knob clockwise and counterclockwise to adjust the numerical
value (time or temperature). After adjustment, press “Select”knob again to save and exit the digital zone.