Instruction Manual

5. Operating Instructions
Please read the following instructions carefully before pressing the function keys.
1
Open lid: Hold the lid handle, turn the lid counterclockwise to open position then raise it (See below pictures).
2 Take out the inner pot and place ingredients and water in it. (See below). Food and water shall not be more than
4/5 full(P3). Food is easy to expansion in water shall not be more than 3/5 full(P4). Food and water must not be
lower than 1/5 of full(P5).
Over filling may result in clogging the vent pipes and developing excess pressure. This could also cause spillage and
may damage to the unit.
The total amount of food and water should NEVER exceed the maximum level marking of the inner pot. Please refer
to the max fill lines (4/5 QL) in the inner pot.
③ Place the inner pot into the housing. Clean the bottom of inner pot and surface of heating plate before inserting
the inner pot. After putting into the inner pot, gently rotate the inner pot to ensure good contact between the inner
pot and the heating plate. (P6).
④ Close Lid：
◆Check that the Silicone Ring is secured in the lid before closing.
◆Hold the lid handle and put it down after making sure the open label
on the lid is aligned with the label on the
body, then turn the lid clockwise until it fits (The label is aligned with the label on the pot body). A