User Manual
7
Care and Maintenance
Cleaning your wine cooler
Turn off the power, unplug the appliance, and remove all items including shelves
Wash the inside surfaces with a warm water and soft cloth
Wash the shelves with a mild detergent solution
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean
soft cloth. Do not use steel woo
l or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
Power failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if
you minimize the number of times the door is opened. If the power is going to be off for a longer period of time,
you need to take the proper steps to protect your contents.
Moving your wine chiller
-Remove all items (bottles)
-Tape down securely all loose items (shelves) inside your appliance.
-Turn the adjustable leg up to the base to avoid damage.
-Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. If you
absolutely need to transport the chiller horizontally, transport the chiller on its back (door on top). Also protect
outside of appliance with a blanket, or similar item.
Energy saving tips
The wine chiller should be located in the coolest area of the room, away from heat producing appliances, and out
of the direct sunlight.