User Manual

Battery pack button

1. Remove the Battery

Dust cup button

A. Use the brush side to clean the

metal mesh and inner filter:

B. Use the knife side to remove

tangled hairs or debris from the

brush roller.

Remove the Battery

How to use the assembly

6. Cleaning the Dust Cup

2. Open the Dust Cup

3. Remove the Filter 4. Wash the Filter Case and Sponge

Using the Cleaning Brush

Power Brush

Metal Tube

Dust Cup

Dust Cup Button

Battery Pack

Battery Pack Button

Speed Control Button

Metal Tube Locker

Power Brush Locker

Switch

Main Body

When the LED light of floor brush filckers for 6 times,

please check if the floor brush is entangled with foreign

objects or blocked.

How to clean the vacuum cleaner

PAGE 1
How to use the assembly Remove the Battery Main Body How to clean the vacuum cleaner 2. Open the Dust Cup 1. Remove the Battery Speed Control Button Battery Pack Button Battery Pack Battery pack button Switch Dust cup button Dust Cup Button 3. Remove the Filter 4. Wash the Filter Case and Sponge 5. Using the Cleaning Brush 6. Cleaning the Dust Cup Metal Tube Locker Dust Cup Metal Tube A. Use the brush side to clean the metal mesh and inner filter: Power Brush Locker Power Brush B.
PAGE 2
Have the vacuum cleaner repaired only through qualified specialists and only using original spare parts. This ensures that the safety of your vacuum cleaner is maintained. Do not clean the vacuum cleaner with a water jet pointed directly at it. The penetration of water into the vacuum cleaner lid increases the risk of an electric shock. Do not open the battery pack. Danger of short-circuiting. Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture.