User Manual

BATTERY REPLACEMENT
1. Open the Mooshimeter per directions above.
2. Remove old batteries.
3. Observe the battery polarity indication on the circuit
board. Insert 2 new AA 1.5V batteries as shown on the
circuit board.
4. If you have inserted the batteries with the correct
polarity, the Mooshimeter's LED will blink slowly several
times before turning off. If the light does not blink, check
the battery polarity.
5. Close the Mooshimeter per directions above.
CLEANING
Gently wipe the assembled meter with a damp cloth.
Do not touch or apply cleaning agents to the circuit board.
Do not use any solvents or other cleaning agents while cleaning your Mooshimeter. The outer housing is a polycarbonate based material,
and may be damaged by incompatible cleaners.