Instructions / Assembly

TROUBLE SHOOTING GUIDE
If your light(s) won’t turn on:
- Make sure control unit is plugged into a
power outlet that is working.
- Check that bulb(s) is properly installed and
not damaged or burned-out.
- Trace low voltage wire to ensure the cable
has not been cut between the control unit
and the first light.
- Look for bent terminals in lens base and
straighten.
If there is no response after taking these
actions, contact our Consumer Service for
assistance at
Canada: 800-561-4321
U.S.: 800-447-4364
WARRANTY
Woods Industries (Canada) Inc. (“Woods”) warrants
this control unit for one (1) year from the date of
purchase, when operated under normal conditions by
the original purchaser, against defects caused by
Woods’ workmanship or materials. This warranty is
limited to the repair or replacement, at Woods’
discretion, of all or part of the control unit.
Woods is not responsible for injury, property damage
or other consequential damages or damages to third
parties arising directly or indirectly from an actual or
alleged defect in material or workmanship of the
Product.
There are no representations, warranties or
conditions, express or implied, statutory or otherwise,
other than those herein contained.
This warranty expressly excludes the implied
warranties and conditions contained in the Sale of
Goods Act (Ontario) or any other statues.