Safety Data Sheets (SDSs) Safety Data Sheets (SDSs) Client Add. of Client Xinxiang Boys Power Sources Co., Ltd. Zhuxiaoguo Village, Hehe Township, Xinxiang City, Henan Province Description Ni-MH Button Model /Type QNB40 Manufacturer Xinxiang Boys Power Sources Co., Ltd. Add. of Manufacturer Zhuxiaoguo Village, Hehe Township, Xinxiang City, Henan Province Nominal Voltage 1.2V, 40mAh Date of Receipt 2017-11-01 Laboratory Address Approved Signatory Shenzhen ZRLK Testing Technology Co., Ltd.
Safety Data Sheets (SDSs) 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Identifier Product name: Ni-MH Button Model: QNB40 Other means of identification Synonyms:none Recommended use of the chemical and restrictions on use Recommended Use:Used in portabl electronic equipments; Uses advidsed against: none Details of the supplier of the safety data sheet: Supplier Name: Xinxiang Boys Power Sources Co., Ltd.
Safety Data Sheets (SDSs) H361 Suspected of damaging fertility or the unborn child H330 Fatal if inhaled H372 Causes damage to organs. H410 Very toxic to aquatic life with long lasting effects H400 Very toxic to aquatic life H302:Harmful if swallowed; H351 Suspected of causing cancer. H332 Harmful if inhaled H314:Causes severe skin burns and eye damage; H220 Extremely flammable gas precautionary statements: Prevention: P201 Obtain Special instructions before use.
Safety Data Sheets (SDSs) Disposal P501: Dispose of contents/container in accordance with local/national regulations Hazards not otherwise classified (HNOC) Not Applicable Other information No information available. 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical characterixation: Mixtures Description: Product: Consisting of the following components. Common Chemical Name Concentration (%) CAS Number Iron 34.47 7439-89-6 Polypropylene 6.04 9003-07-0 Cobalt(II) oxide 1.
Safety Data Sheets (SDSs) 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media CO2, dry chemical powder, water spray. Unsuitable Extinguishing Media:No information available. Specific Hazards Arising from the Chemical Formation of toxic gases is possible during heating or in case of fire. In case of fire, the following can be released: Carbon monoxide(CO) Carbon dioxide Other irritating and toxic gases. Hazardous Combustion Products Carbon oxides.
Safety Data Sheets (SDSs) Methods for Cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand, earth or other Non combustible absorbent material. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly. 7. HANDLING AND STORAGE Precautions for safe handling Handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash thoroughly after handling.
Safety Data Sheets (SDSs) Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Ensure adequate ventilation. Individual protection measures, such as personal protective equipment Eye/Face Protection: Tightly sealed goggles Body protection: Protective work clothing.
Safety Data Sheets (SDSs) Upper/lower flammability or explosive limits Not determined. Vapor Pressure: Not determined. Vapor Density: Not determined. relative density: Not determined. Solubility in Water: Not determined. Solubility in other solvents Not determined. n-octanol/water partition coefficient Not determined. Auto-ignition temperature Product is not self-igniting. Decomposition temperature Not determined. Odout threshold Not determined. Evaporation rate Not determined.
Safety Data Sheets (SDSs) 12. Ecological Information Toxicity: Acquatic toxicity: Avoid release to the environment. - if this is not the intended use. Persistence and degradability: No further relevant information available. Bioaccumulative potential: No further relevant information available. Mobility in soil: No further relevant information available. Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. Other adverse effects: No information available. 13.
Safety Data Sheets (SDSs) The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The materials and pack design shall be chosen so as to prevent the development of unintentional electrical conduction, corrosion of the terminals and ingress of moisture. The Ni-MH Buttonhaving the potential of a dangerous evolution of heat must be prepared for transport so as to prevent: (a) a short-circuit (e.g.
