Owner`s manual

Page 8
For HELP, call 727.573.9611
The following dimensions can be used to determine the proper location of
submerged conduits in concrete slab installations. All dimensions are made from
the outside of the hot tub’s frame with the access panels removed. The topside
control panel is shown at bottom of diagram for reference.
Figure 2 – Conduit Entry Location Reference Points
Model Dimension A Dimension B
1301
26” 12”
1302
20” 12”
Table 1 – Conduit Entry Location Dimensions
10) Consider positioning your hot tub out of or adequately protecting it from the
wind. Just as people can get cold on cool/windy days, so can your hot tub.
Windy environments can significantly increase operating costs.
11) Consider using an insulating pad. In cold climates, the ground can rob heat
from the hot tub and increase your operating costs.