Operating Instructions

（2）Color Temperature Setting
The System has three color temperatures to choose from: Cold, Neutral and Warm.
what you need to do is just to click.
（3）Brightness Setting
Screen brightness setting,which can be set to 0-100%,you can adjust the value by
dragging the scroll bar or clicking the +/- on the phone to adjust it.
（4）Screen Switch
Power on and off of the Led Screen that is controlled by the media player.
After setting the above 4 parameters for the media player,click the “ save”button
in the upper right corner to take it effect.
2、LED Configuration
This setup is to get the led screen connected, the following describes the settings
of each parameters.
（1）Coordinate Position
X Position, Y Position, the coordinates of the starting position of the image capture
（2）Sending Card Settings
Card quantity of a column and a row, the entire quantity of the receiving card
from the screen (column and row)
The width and height of the card, that means the loading pixel capacity of each
receiving card.
（3）Network Port Serial Number
Select the Network Port,the port to which the current led screen is connected to
the media player,pay attention to the serial number(if the serial port number can not
be determined, it can be identified by the AutoLED Debugging software).
（4）Quick Connection
The connecting method of the receiving card, the system has 8 defaults
conventional S Type wiring methods.( face to the LED Screen to see that).
After setting the above 4 parameters for the media player, just click the
“save”button in the upper right corner to take it effect.
3，Video Source Switching（MB1/MB2 does not have this function，it
only with MB4/MB6 )
（1）Video Source
You c a n sw i t c h be t w e en t h e “i n t e rn a l “ vi d e o s o u rc e o f th e m e d i a p l ay e r a n d t h e
external “HDMI” video source.
（2）Coordinate Position
It could take a screenshot of the internal or external HDMI video source, just type
in the accurate X,Y coordinates positions. It is often used for multi-screen splicing and
synchronous playing.
4、Detection
（1）Environment Brightness
The media player has an external light sensor which could automatically sense the
brightness of the surrounding environment.
（2 ) Temperature
The media player is connected with an external temperature and humidity sensor
which could automatically detects the temperature and humidity inside the led screen.
7