Owner's Manual

MOON by Simaudio
Figure 3: CRM-3 Remote
Control
The MOON 250i v2 uses the ‘CRM-3’ full-function remote control (figure 3). It
operates on the Philips RC-5 communication protocol and can be used with other
MOON components. The ‘CRM-3’ remote uses two CR-2032 batteries (included).
To install them, simply remove the two screws from the slidable lower section of
the back plate.
To engage the ‘CRM-3’ remote for use with the MOON 250i v2, you must first
press the button labeled AMP.
The (Power) button, at the top left switches the unit to either ‘Standby’ or ‘On’
mode.
The 2 buttons labelled  INPUT  allow you to sequentially scroll, through all
available inputs.
The 2 buttons labelled - VOL + allow you to control the volume level.
The 2 buttons labelled  BAL  control channel balance;
The button mutes the sound. Pressing again will reinstate the output .
When your selected input is “MiND” and the QUEUE contains at least one track,
you can use the remote control to play music from the MiND’s QUEUE. You can
use the (pause), (play), (backward) and (forward) buttons. Pressing
once will repeat the QUEUE’s current track; pressing a second time will repeat
the entire contents of the QUEUE; pressing a third time will cancel the repeat
mode. Pressing will randomly play the entire contents of the QUEUE. Pressing
a second time will cancel the random mode.
When in repeat mode the icon will appear in the screen display; when in
random mode the icon will appear in the screen display.
Remote Control