Owner's Manual

MOON by Simaudio

Unpacking

The MOON 250i v2 should be removed from its box with care.

The following accessories should be included inside the box with your unit:

• AC power cable

• ‘‘CRM-3’ remote control with two ‘CR-2032’ batteries

• ‘SimLink™’ cable with 1/8” mini plug terminations on each end

• Warranty and product registration information (USA and Canada only)

Once the unit is unpacked, inspect it thoroughly and report any damage to your dealer immediately.

We suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required

to transport this product. The customized packaging is specially designed to protect the unit from any

potential damage during transit.

Please write the serial number of your unit in the space provided below for future reference.

Installation & Placement

Serial Number

The MOON 250i v2 Integrated Ampliﬁer requires

reasonable ventilation to maintain an optimum and

consistent operating temperature, especially since it

will radiate heat when driven hard. Consequently, it

should be placed in a location with empty space

around it for proper heat dissipation. You should

never place another component on top of this

integrated ampliﬁer. As well, it should be placed on a

solid level surface. You should avoid placing it near a

heat source or inside a closed cabinet that is not well

ventilated as this could compromise the ampliﬁer’s

performance and reliability. The 250i v2 uses a large

toroidal transformer in its power supply; even though

it is well shielded, you should not place this

integrated ampliﬁer too close to source components

sensitive to EMI, such as turntables, phono

preampliﬁers and CD Players. Finally, you should

never place another component directly on top of

this integrated ampliﬁer.