User`s manual

Page 86
Voyager XL User’s Manual - Appendices
Page 87
Voyager XL User’s Manual - Appendices
Appendix C - Initialization Parameters
SECTION PARAMETER VALUE
LFO
LFO RATE 155
LFO SYNC OFF
Mod Wheel
Modulation
Bus
SOURCE Triangle
DESTINATION Pitch
SHAPING Filt. Env.
AMOUNT 022
Pedal /ON
Modulation
Bus
SOURCE PGM
DESTINATION PGM
SHAPING Filt. Env.
AMOUNT 000
Oscillators
OSC 1 OCTAVE 8’
WAVE 179
OSC 2 FREQUENCY 0
OSC 2 OCTAVE 8’
WAVE 179
OSC 3 FREQUENCY 0
OSC 3 OCTAVE 8’
WAVE 179
1-2 SYNC OFF
3-1 FM OFF
3 KB CONT ON
3 FREQ HI
GLIDE RATE 104
Switch
Controls
GLIDE SW OFF
RELEASE SW OFF
When you select the INIT PARAMETERS function in the Panel Mode menu, the current Preset sound de-
faults to a single 8’ square wave oscillator with moderate ltering and basic ON/OFF envelopes. From this
starting point, you can adjust and tweak the sound to create a new preset, or just explore the various param-
eters to see what they do. The following tables list the complete default values of the Initialization Preset.
Front Panel Controls:
SECTION PARAMETER VALUE
Mixer
EXTERNAL 128
EXTERNAL SW OFF
OSC 1 128
OSC 1 SW ON
OSC 2 128
OSC 2 SW OFF
OSC 3 128
OSC 3 SW OFF
NOISE 128
NOISE SW OFF
Filter
CUTOFF 128
SPACING 0
RESONANCE 000
KB CONT AMOUNT 255
MODE LP/LP
Filter
Envelope
ATTACK 000
DECAY 000
SUSTAIN 255
RELEASE 160
AMOUNT TO FILTER +64
Volume
Envelope
ATTACK 000
DECAY 000
SUSTAIN 255
RELEASE 160
ENV GATE Keybd
Output
MASTER VOLUME 192
HEADPHONE VOL. 000
1. The GLIDE and RELEASE switch controls are part of the left-hand controller panel on all
Voyager Keyboard editions. On the RME, these switch control functions are selected in software
from the Panel Mode menus.
2. When initialized, the MASTER VOLUME value defaults to a value of 192 when the Panel Mode
‘MASTER VOLUME’ function is set to ‘YES’. Otherwise, the Master Volume is always controlled
by the actual knob setting.