User guide

Minimoog Voyager Editor Librarian Page 45
APPENDIX A – OSX AUDIO MIDI SETUP PROCEDURE
Steps 1 through 4 should only be necessary if you are setting up a MIDI interface for the first time, or if you are
connecting to a new MIDI interface. Some MIDI interfaces may require additional connection setup. Refer to the
manufacturers instructions for details. The OSX Audio MIDI setup can also be used to connect external keyboard
controller to route and play notes on your Voyager/RME.
Step by step OSX MIDI setup:
1. If you are installing a MIDI interface for the first time, or if you are connecting to a new interface, follow the
manufacturer’s recommended installation procedure for guidelines on the installation process. This will generally
mean either installing an internal MIDI interface board into the Macintosh chassis, or simply connecting an
external USB or Firewire MIDI interface, then installing the driver software.
2. Upon completing step 1, reboot the computer (or power ON) and open “Audio MIDI Setup” (found in
Applications/Utilities/Audio MIDI Setup). You can also use the Finder to search for “Audio MIDI Setup”.
3. In the Audio MIDI Setup window, select the MIDI Devices tab below the title bar. You should now see an icon
for your new MIDI interface. In this example, we are adding an M-Audio MIDI Sport 1x1 USB interface. (Note:
Depending on your Mac OS version, the Audio MIDI Setup window may look slightly different from the one shown
below)