User guide

Minimoog Voyager Editor Librarian Page 38
9.1 Single Parameter Adjustment
This function allows you to change one of the preset parameters for an entire Voyager bank. It works similar to
the Single Parameter Adjustment in the User Bank. Simply select the desired parameter from the pull-down
menu:
and use the slider control to set the desired value:
When you click OK, a new Kids bank is generated from the Mommy bank. Every preset in the Kids bank now
contains the newly modified parameter. To save the change, select Replace Voyager Bank with the Kids Bank
from the FILE menu. Clicking OK will send the Kids bank to the Voyager. Clicking No will not update the Voyager
bank, but will update the Mommy bank with the changes, allowing you to make additional changes if desired.
Note: Numerical values for Single Parameter Adjustment are displayed as 8-bit values (0-255) when the
Editor Parameter Resolution is set to 8-bit resolution. Numerical values are displayed as 16-bit values
(0-65535) when the Editor Parameter Resolution is set to 16-bit resolution.