User guide

Minimoog Voyager Editor Librarian Page 26
6.3.3 Copying Presets to the User Bank
To copy presets from the Library to the User Bank, you can either drag the presets using the mouse, or use the
left-facing Move arrow. In the example below, clicking on the Move arrow will copy the four selected Bass presets
to the current User Bank:
When moving presets from the Library to the User Bank, the presets in the User Bank will be replaced by the
ones from the Library and will be transmitted to the Voyager bank. A dialog box will ask you to confirm this
operation:
Selecting OK will copy the presets into the User Bank and transmit them to the Voyager. Selecting NO will copy
the presets into the User Bank without transmitting them to Voyager. Selecting Cancel will cancel the operation.
Moving multiple presets into the User Bank will replace the selected preset in the User Bank and the equal
number of consecutive presets. Here is an example illustrating what this means:
1. Select Preset No 003 in the User Bank (any bank).
2. Select 5 non-adjacent presets from the Librarian (any category).
3. Drag the 5 selected Presets from the Librarian and drop them into the User Bank.
4. A warning dialog will be displayed like the one above. Selecting OK will copy the five presets into the
User Bank replacing Presets 003 - 007 with the five selected Librarian presets and transmit them to the to
the Voyager at the same locations. If you select NO then the presets will not be transmitted to Voyager
but they will still replace Presets 003 to 007 in the User Bank. Selecting Cancel will cancel the operation.
Note: Moving a preset from the User Bank to the Librarian will not automatically assign the corresponding
sound category to the preset in the User Bank (the preset’s sound category in the User Bank will remain
unchanged). However, if a preset moved from the Librarian to the User Bank it will include the corresponding
sound category.