User guide

Minimoog Voyager Editor Librarian Page 22
6.2 VOYAGER PANEL
The Voyager Panel is the second component in the Editor window. The Voyager Panel displays the settings of the
Voyager’s knobs and switches for the current preset. This is handy to give a visual reference as to how the
selected preset is setup on the Voyager. While most of the knobs on the panel have a red dot to indicate their
settings, pointer knobs and switches on the display indicate their actual positions. The yellow LCD displays the
name of the selected preset:
New in version 2.0, the Voyager Panel is interactive, meaning it will not only respond to parameter changes made
from the Voyager, it will send information to the Voyager when a control is changed. Except for the Fine Tune
knob, all controls are active and movable. Rocker and rotary switches will change position when clicked, and
knobs will respond using a rotary motion with the cursor. When the cursor is placed over a knob with a red dot,
the corresponding parameter information is superimposed in the Touch Surface area. The parameters are
displayed in both 8-bit and 16-bit versions:
Note: Any edits made using the Voyager Panel must be written to the Voyager in order to be saved.