Operating instructions
LED Description
2.1
LED Color Status Description
PWR Green On Power is on
Off Power is off
LAN Green On Ethernet is connected
Off Ethernet is not connected
Associated with an access point. The
Green On number of LED lights from “MIN” to” MAX”
Wi-Fi indicates the received signal strength level.
Off Not associated with any access point.
3
Complete the following steps to congure a wireless link between a VLRM24/58 with a PB24M24/58:
• Connect to the VLRM24/58 by opening a web browser and connecting to http://192.168.1.20.
Login to the device using UNBT for the
username and UNBT for the password.
Click on the Network tab on the
conguration page.
Note that a static IP address of 192.168.1.20
has been assigned to the unit as default.
The default IP address, subnet mask, and
gateway can all be changed from this screen
if needed.
Click in the corresponding box and enter in
the required IP setting, then click the Change
button in the bottom right hand corner of
the window.
NOTE - Connection to the VLRM24/58 will be lost if the IP address is changed at this time. A connection will need
to be made to the new IP address that has just been assigned in order to view the conguration page again.