User`s manual

Quick Reference Guide, cont
To change MIDI Channels
Press [LEVEL 2]
Press [1] The current channel (or Omni) will be displayed on the edit
LEDs.
- Now turn the incremental controller to change channels. After
selecting a channel, either press a different yellow button to edit, or
select an orange patch button. This will lock the most recently
selected channel into memory.
NOTE: Use caution when performing the channel selection
parameter. As with any other incremental controller parameter, the
SOURCE will edit the current parameter until a new parameter or a
new patch is accessed..
To Perform a SYSEX Dump
Press [LEVEL 2]
Press [14] The 256 patches will be saved to MIDI.
To Perform a Soft Reset
Turn off the power.
Press and hold the [HOLD] button.
While pressing the [HOLD] button, turn on the power.
As mentioned before, any further questions may be directed to the original
SOURCE owner's manual. All other operations are as normal.
The next page shows a picture to help you in memorizing the new
functions: