User`s manual

ENCORE ELECTRONICS SMK MIDI Specification 1991
RECOGNIZED RECEIVE DATA
STATUS SECOND THIRD DESCRIPTION
1000nnnn 0kkkkkkk 0xxxxxxx Note OFF Note2
kkkkkkk = 36-84
1001nnnn 0kkkkkkk 0vvvvvvv Note ON Note1
kkkkkkk = 36-84 vvvvvvv = 0-127
1011nnnn 0ccccccc 0vvvvvvv Control Change
ccccccc: control # (for bank select)
vvvvvvv: control value
1100nnnn 0vvvvvvv Program Change
vvvvvvv = 1-16
1110nnnn 0vvvvvvv 0vxxxxxx Pitch Bend
11111000 Timing Clock Note3
11111010 Start Note3
11111011 Continue Note3
11111100 Stop Note3
*1 Does not respond to velocity, except for v=0 being a running status NOTE OFF.
*2 Does not respond to velocity.
*3 For arpeggiator
xxxxxxx Ignore these bits
System Exclusive Messages Description
11110000 Sysex header
00000000 00000000 00101111 Encore ID
00000001 Product #
000000cc cc=01: Initiate bulk dump to MIDI
cc=10: Bulk load from MIDI
0ddddddd ........ ........ ........ ........ exclusive data
11110111 End of exclusive
Example: To command the Source to dump its memory to MIDI- F0 00 00 2F 01 01 F7
To command the Source to receive the following system exclusive data stream-
F0 00 00 2F 01 02 [dd dd dd ....... (sysex data)] F7
ENCORE ELECTRONICS SMK MIDI Specification 1991