User manual
7 Operation Initial Pump Set-Up
© 2010 Moog GmbH User Manual RKP-II (CA53461-001; Version 2, January 2010) 47
7.1.2.4 Servo Control, C1
Fig. 25: Servo Control, C1
Procedure:
1. Regulate the pump's flow volume by positioning the adjustment lever.
Information about the Servo Control:
Ö Chap. "3.5.7 Servo Control, C1", Page 22
The zero position and the end position are set at the factory. Manual or
mechanical operations are performed using the adjustment lever.
Pos. Description
1 Zero position (set at the factory)
2 End position / ±V
max.
(set at the factory)
Displacement V [cm
3
/R] 1932456380100
Angle α [°] 444757445656
Control torque M [Nm] Zero position 1.2 1.6
End position 1.6 1.7 2.4 2.6 2.6
max. 8
Tab. 11: Adjustment Torque Servo Control