User Guide

8
•
Pedal Sensor: The Pedal Sensor sits under
the piano’s pedals and detects the use of
the sustain and soft pedal.
• Library Card: The Library Card serves a dual
purpose. It functions as a memory storage
device, which holds 20 Setups. It also
serves as a height gauge for setting the
distance between the Scanner Bar and the
keys.
• Two cables: Used for connecting the
Scanner Bar and Pedal Sensor to the
Control Module.
And of course,
• This Manual.
To use the PianoBar you will need:
• A source of power: 85-250 Volts AC, 50-60
Hz.
• Your piano
• If you are using the PianoBar’s built in
sounds you will need a pair of amplified
monitors or headphones
• If you are using external MIDI devices, you
will also need MIDI cables to connect them
to the Control Module.