User Guide

whether the MIDI input is sent to the Internal

sounds, the scanner bar LEDs, Both, or neither.

When viewing the MIDI out Routing for a Setup, the

settings can be viewed in this screen, but not

changed. The routing of MIDI out is done on page

1 of the Channel Setup function.

OPTIONS

Options are global functions, independent of the

Setups. The following are the descriptions of the

Options:

• DSP: Display viewing angle

• LagComp: adds a delay to the MIDI signal to

align the start of a MIDI event with the

hammers striking the keys.

• Tune: Globally tunes the sound engine +/- 100

cents.

• PC: switches between 0 to 127 and 1 to 128

Program Change numbering schemes.

• LED TRACK: The word TRACK indicates that the

Scanner Bar’s LEDs light up when the key under

it is played. With the cursor underneath this, use

the value knob to turn the LED tracking off. The

word track changes to lowercase.

• Base CH: Base Channel for PianoBar to receive

Program Change commands.