User Guide

curve that is not affected by the velocity of your

actual playing. There are 10 curves, their responses

are displayed graphically.

Pan: This is the left/right balance of the sound

assigned to the current channel.

Trn: This refers to the transposition of the sound

assigned to the current channel. Transposition can

be applied in semitones – up to 99 semitones up

or down from the key being played.

Reverb: This is the amount of Reverb applied to

the current channel sound.

Chorus: This is the amount of chorus applied to the

current channel sound.

CONTROLLERS

The Controllers function is used to assign up to 6

(displayed as A through F) MIDI CC numbers and

values on up to 16 MIDI channels. The Controllers

function is also for assigning the function of the 3

Pedal Controller inputs. The CC values are sent to

either the PianoBar’s internal synth, the external

MIDI output, or both when a Setup is selected. MIDI

CCs are typically used for setting the

characteristics of a sound, such as the attack time,

or the portamento speed. A MIDI CC message

consists of a Number - which corresponds to a

parameter that is to be changed, and a Value –

which refers to how much that parameter is

changed. The upper left hand corner displays the

current Controller (A through F) or Pedal Controller

(Pedal 1-3). For Controllers A through F, the MIDI

CC Number is set (after the # symbol) and a Value

is selected. Move the cursor under the Channels to

enable this message to be sent to the internal

synth, the external MIDI output, or both. For the

Pedal Controllers, a MIDI CC Number is selected,

and the position of the Expression pedal