User Guide

Format Card is used to create a blank Library Card

for storing your Setups. Any Setups present on the

Card will be erased when this is performed, so be

sure the card being formatted does not contain

any valuable data before proceeding. With the

cursor placed under the function, press Enter. The

display prompts to press Enter to complete, or

press Escape to cancel.

Make Remote Card, Make Scanner Card,

Copy

Card to Fixed:

These functions are used at the factory for

diagnosis purposes only and are not used in

operation of the PianoBar.

CHANNEL SETUP

The Channel Setup Function is where the bulk of

editing is done to configure how the PianoBar

sends MIDI information, and what the internal

sounds are. The Channel Setup Function contains

two pages. Use the Enter button to toggle between

them unless the cursor is under the Zone

parameter (in this case pressing Enter enables the

selecting of the Zone for the current MIDI channel).

The two pages look something like this:

The first item, CH, stands for MIDI Channel. With the

cursor under this parameter, the Value control can

be used to select the channel to configure. There

are 16 MIDI channels. Each can have its own

independent settings in the Channel Setup

function. This parameter is on both page 1 and 2.