User Guide

LIBRARY

The Library Edit function is used to name and

manage the location of Setups and Create Library

Cards

There are a total of 10 Library functions. Placing the

cursor under the function and rotating the Value

control selects the different functions. The following

are the functions and how they work:

Name:

The Setup Name and Number are displayed,

along with the current Library function, Name. With

the cursor placed underneath the function, Press

Enter/Edit to Begin naming the preset. Use the

cursor buttons to move the cursor to the desired

position and the Value control to change

characters. Press escape when finished.

Copy to Setup:

This allows you to copy the current Setup to

another one of the 80 user accessible memory

locations. Copying to a setup between 61-80

copies the setup to a library card – if there is a

library card plugged into the slot. First, select the

desired destination location where the current

Setup will be copied. With the cursor under the

function, press Enter/Edit. The display will prompt to

press Enter to complete the process or press

Escape to cancel.

Swap with Setup:

This allows you to swap the current Setup with

another. This is useful for organizing your Setups.

First, select the Setup to swap locations. With the

cursor placed underneath the function, Press Enter.