User Guide

There are a few instances where the Enter/Edit

button serves a different purpose, such as

changing between two pages (such as Channel

Route), or initiating a process (such as formatting a

library card). The actual parameters and functions

are frequently abbreviated. The following is a

comprehensive guide to the Menus and Functions

of the Control Module.

MAIN SETUP PAGE

The Main Setup page is described in brief in the

“Getting Started” Chapter. Let’s review and

elaborate:

The Main Setup Page looks something like this:

The Main Setup Page is the screen used for

performance applications. There are three

functions that can be performed: changing

Setups, and altering the volume of Channels 1-4,

and sending an “All Notes Off” message. In

addition, the Main Setup Page displays a bar

graph of the MIDI velocity on Channels 1-4 if they

have an internal sound or external MIDI Output

assigned.

Changing Setups:

A Setup can be changed from the Scanner Bar

and piano keys, the front panel value control, or by

MIDI program change. To change Setups using

the Scanner Bar and Piano Keys, locate the Green

LED above the lowest E flat. Cover this LED with

your finger, and notice that it disappears and an

LED appears above one of the piano’s keys. By

counting up from the low A, this corresponds to the

current Setup number. Play another key to change

to a different Setup. This allows easy access to