User Guide

6) Connect the Pedal Sensor and Scanner to the

Control Module using the cables provided, using

the shorter of the two cables to connect the

Scanner to the Control Module. Place the Control

Module so you can conveniently view the screen

and reach the buttons.

7) Connect the Control Module to the Power

source and sound system (or headphones).

Connections to external MIDI devices can be

made if so desired, or the MIDI interface of a

nearby computer.

8) Turn on the power (on the back of the Control

Module). The opening screen displays the version

number of the software. After a few seconds a

second screen is displayed. If the Scanner is at the

correct height, the screen will say “Press Enter to

Calibrate”. This screen appears for about 6

seconds, so press Enter before it disappears, if

calibration is necessary. Calibration will be

necessary the first time the Scanner is installed on