Instruction manual

- 4 -
!
!
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
Power 12Vdc, Class 2 Only
Total Power: 22 watts (Excluding camera)
Accessories (Heater/Blower): 22 watts
Heater: 20 watts
Blower: 2 watt
NOTE: This unit is designed for operation in an upright position.
Installing the housing upside down may cause damage to the
internal equipment, and will void the warranty.
Be sure the bracket is properly and securely mounted to a supporting
structure capable of rigidly holding the weight of the entire unit.
GENERAL INSTRUCTIONS:
Tools Required: Phillips Head Screwdriver
7/16" open-faced wrench
PFD75C12N, PFD75T12N
IP Ready Pressurized Network Housing
IP Ready Pressurized Network Housing with 12Vdc input, wall or pendant mounting,
heater & blowers, ready for standard IP PTZ cameras.
ASSEMBLING THE UNIT:
1. Remove content from all boxes. Contents should include:
Main Housing Assembly
Either with wall mount or pendant bracket
Dome Assembly - Clear or Tinted
Do not remove the protective lm until the product is assembled and installed.
3 Packet Assemblies
Gooseneck Wall Mount