Instruction manual

ManualsBrandsMoog ManualsSecurity CamerasPDW7CS- 9

Moog Inc.

Sensor and Surveillance Systems

3650 Woodhead Drive Northbrook, IL. USA 60062

+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com

Installation and Operation Instructions

Before attempting to connect or operate this product, please

read these instructions completely.

81-IN5410 111113

PurgeDome

™

Explosion-Proof Pressurized Camera System

PDW7CN-9................ IP Network Ready 7” Explosion-Proof PurgeDome Outdoor PTZ Camera Systems for Hazardous environments UL approved for Class 1,

Division II applications. Includes Purging System and Lines. With 23x zoom Day / Night camera, MPEG-4 & MJPEG video compression,

Full D1. Clear dome, with 24Vac input, heater / blower

PDW7CS-9............... Analog 7” Explosion Proof PurgeDome Outdoor PTZ Camera Systems for Hazardous environments UL approved for Class 1, Division II

applications. Includes Purging System and Lines. With 23x zoom Day/Night camera, MPEG-4 & MJPEG video compression,

Full D1. Clear dome, with 24Vac input, heater / blower

To be used with the 81-IN5409 Instruction Manual.

Summary of content (12 pages)

PAGE 1
Installation and Operation Instructions Before attempting to connect or operate this product, please read these instructions completely. PurgeDome™ Explosion-Proof Pressurized Camera System PDW7CN-9................ IP Network Ready 7” Explosion-Proof PurgeDome Outdoor PTZ Camera Systems for Hazardous environments UL approved for Class 1, Division II applications. Includes Purging System and Lines. With 23x zoom Day / Night camera, MPEG-4 & MJPEG video compression, Full D1.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Product Warranty Registration Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell. See full warranty details at www.moogS3.
PAGE 4
Limited Warranty for Moog Products Moog - Decatur Operations, subsequently referred to as “Manufacturer,” warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics Five (5) Years Accessory Brackets Five (5) Years Controllers Three (3) Years Power Supplies / IR Illuminators Three (3) Years Poles / PolEvators / CamEvator Three (3) Years Warrior Series / Q-View Three (3) Years ™ ™ ™ Three (3) Years 6 mo
PAGE 5
Content of Box Content of Box PROTECTED CAMERA ENCLOSURE SUPPLIED 1/4 “ & 3/8 ” POLY TUBING PAN / TILT DOME PURGE / PRESSURIZATION UNIT HARDWARE
PAGE 6
1     Unit is shipped with 100’ (max) flex tubing (3/8” & 1/4”) to connect enclosure to purge pressurized unit. 2 fitting are provided as shown in the diagrams.
PAGE 7
3 English NOTES • To ensure adequate protective gas flow to the protected enclosure, all piping and tubing must be fully reamed. • Precaution must be taken to prevent crimping and other damage to protective gas piping and tubing. Caution must be used when opening/closing swing panel to prevent tubing kinks. • Supplied 1/4” & 3/8” Poly Tubing have ferrule, nut & insert preset. Use that end for connecting to power box.
PAGE 8
5 TUBING CONNECTION DIAGRAMS ENCLOSURE SUPPLY OUTLET ENCLOSURE REFERENCE INLET PEPPERL+ FUCHS PURGE/PRESSURIZATION UNIT SYSTEM SUPPLY INLET 6 TUBING CONNECTION DIAGRAMS DOME PRESURE GAUGE [ENCLOSURE] EXP PRESURE SWITCH ATMOSPHERIC REFERENCE SDOEN OF WOSTOE .3 .2 .1 .4 SAFE 0 HIGH LOW .
PAGE 9
7 CONNECTION SIZES, LENGTHS & BENDS CAMERA PEPPERL+ FUCHS REFERENCE GAS SUPPLY (System Supply) PROTECTED CAMERA ENCLOSURE CAMERA PURGE/PRESSURIZATION UNIT SUPPLY System Supply 3/8” OD SS Tubing Fully Reamed MAXIMUM: 20 ft / 10 bends Camera Supply Camera Reference SUPPLIED 3/8” Poly Tubing SUPPLIED 1/4” Poly Tubing 100 ft MAX 100 ft MAX SET-UP PROCEDURE • See supplied Model 1001A Installation and Operation Manual for Class I Purging Set-up.
PAGE 10
11 WALL MOUNT: Attach unit securely to the wall mount using (4) 3/8” or 8mm hardware (not supplied). 12 INPUT: (120VAC 1A 240VAC .5A) 220-240VAC INPUT The power box may be pole mounted with the pole support clips. (Stainless steel straps not provided). 13 110-120VAC INPUT 240Vac 120Vac Input Input The box is designed for either 120 or 240 VAC input single phase.
PAGE 11
14 OUTPUT: (24VAC 84VA) HEATERS CAMERA 52 WATTS MAX 32 WATTS MAX Connect Housing Power 24Vac Power To Housing Optional 24Vac Output Main Switch Internal resettable fuses are supplied for the main 24VAC output lines. Do not connect heaters to camera output. The PB24 is not designed for 3 phase or 208V systems. 15 16 CAPTIVE SCREW Remove Pan/ Tilt from shipping carton. Install in base bracket in housing. To secure in place, tighten captive screw.
PAGE 12
17 18 To install the dome align the tabs and twist counter clockwise to secure. Hand tighten the screws on the dome. Recommended torque 12 inches/lb (1.35Nm).