Operating instructions

ManualsBrandsMoog ManualsSecurity CamerasPB24M24

Moog Inc.

Sensor and Surveillance Systems

3650 Woodhead Drive Northbrook, IL. USA 60062

+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com

PB24M24 and PB24M58

MIMO Wireless Solutions

PB24M24....... Rugged outdoor wireless box, with a 220/110Vac input and 24Vac output for camera, fuse protected with a wireless 2.4GHz MIMO transmitter.

Directional antenna. Pole mounting clips included.

PB24M58....... Rugged outdoor wireless box, with a 220/110Vac input and 24Vac output for camera, fuse protected with a wireless 5.8GHz MIMO transmitter.

Directional antenna. Pole mounting clips included.

Installation and Operation Instructions

Before attempting to connect or operate this product, please

read these instructions completely.

81-IN5465 111913

Transmitter

Power Box

Summary of content (13 pages)

PAGE 1
Installation and Operation Instructions Before attempting to connect or operate this product, please read these instructions completely. PB24M24 and PB24M58 MIMO Wireless Solutions PB24M24....... Rugged outdoor wireless box, with a 220/110Vac input and 24Vac output for camera, fuse protected with a wireless 2.4GHz MIMO transmitter. Directional antenna. Pole mounting clips included. PB24M58.......
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Product Warranty Registration Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell. See full warranty details at www.moogS3.
PAGE 4
Limited Warranty for Moog Products Moog - Decatur Operations, subsequently referred to as “Manufacturer,” warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics Five (5) Years Accessory Brackets Five (5) Years Controllers Three (3) Years Power Supplies / IR Illuminators Three (3) Years Poles / PolEvators™ / CamEvator Three (3) Years Warrior Series™ / Q-View™ Three (3) Years Three (3) Years 6 months if
PAGE 5
Electrical Specifications English Contents of Box Input Power: 120VAC/240VAC 1A/.5A Power Consumption: 1Amp (120Watts) at 120VAC Power Output: 96VA at 24VAC 52Watts Heater/Blower 32Watts Camera Power An all pole main switch with a contact of at least 3mm in each pole shall be incorporated in the electrical installation of the building. Tools Required: .150” Flathead Screwdriver 7/16 Wrench or Socket 9/16 Wrench or Socket Español Energía De Entrada: 120 Consumo De Energía de VAC/240VAC 1A/.
PAGE 6
Installing the Power Box 1 2 Wall Mounting: Attach unit securely with (4) 5/16”- 3/8” or 8mm hardware (not supplied). • A template is provided in the instructions with the 2 x 8 bolt pattern required for the mounting of this product. • Each fastener should be able to withstand a minimum pull out force of 600 lbs. (272kg) • • • • 3 Connecting Housing to the Power Box Open packet assembly.
PAGE 7
5 OUTPUT: (24VAC) HEATERS CAMERA 24Vac Power To Housing Optional 24Vac Output Main Switch Internal resettable fuses are supplied for the main 24VAC output lines. Do not connect heaters to camera output. The PB24 is not designed for 3 phase or 208V systems. Los fusibles restaurables internos se proveen para las líneas de salida principales 24VAC. No conecte los calentadores con la salida de la cámara fotográfica. El PB24 no se diseña para 3 fases o sistemas 208V.
PAGE 8
6 7 G N L 120V 120V IP Connection from Camera Connect IP cable from camera. Attach the client (transmitter) on wall or pole with the adapter supplied. • Conecte el cable del IP de la cámara. • Ate el cliente (transmisor) en la pared o el poste con el adaptador suministrado. • Reliez le câble d'IP de l'appareil-photo. • Attachez le client (émetteur) sur le mur ou le poteau avec l'adapteur fourni. • Schließen Sie IP-Kabel von der Kamera an.
PAGE 9
Configure the Wireless 1 Pre-configuring PC Setup Prior to the PB24M Series configuration, a computer with its Local Area Connection set to a static IP address is required to pre-configure the device (i.e. 192.168.1.XX). In order to do so, select the “Start” menu, “Control Panel” and then “Network Connections”. Right click on the “Local Area Connection” icon, choose “Properties”, and double click on the item “Internet Protocol (TCP/IP)” from the list as shown in the diagram on the right.
PAGE 10
2 • Connect to the PB24M24/58 by opening a web browser and connecting to http://192.168.1.100. Login to the device using videolarm for the username and camera for the password. Click on the Network tab on the configuration page. Note that a static IP address of 192.168.1.100 has been assigned to the unit as default. The default IP address, subnet mask, and gateway can all be changed from this screen if needed.
PAGE 11
2.2 Wireless Security Options Encryption for the wireless link is also set from the main Wireless configuration page. Select the Encryption method that is desired and enter the appropriate encryption key. Note that this same key will need to be entered in all devices connecting to the wireless network. Click the Change button in the bottom right hand corner to apply the security settings.
PAGE 12
PAGE 13
Wireless IP & Mac Address Form For your convenience and future reference, the following form has been included to record your wireless surveillance systems IP and Mac addresses. Once completed, remove the form from instruction packet and place in a secure place or inside the Moog wireless product. The information recorded will prove beneficial when servicing or expanding your wireless system. Camera # 1 IP Address 192.168.1.