Operating instructions

IP Reset® LED Operation
Green LED – Device Power Indicator
• ON  :PowerOntoDevice
• OFF  :PowerOfftoDevice
Yellow LED – Communication/Signal Status
• TimedMode :Flasheseverysecond
• IntelligentMode :Flashesevery90Seconds(On=inputHigh,Off=inputLow)
Red LED – Operation Mode Indicator
• ON  :IntelligentMode,deviceoperatingasexpected
• OFF  :TimedMode
• Flashing  :IntelligentMode,devicefaultdetected
Hardware Installation (cont.)
LED Operation
To download a copy of the IP Reset software please do the following.
• gotowww.moogS3.com
• Clickon“TechnicalSupport”button.
• Clickon“SetupTools”
• Clickon“IPResetInstallationSoftware”
• OnceProgramhasdownloaded,runprogram.
IP Reset Software