Operating instructions

ManualsBrandsMoog ManualsConsumer electronicsPB24BB

Moog Inc.

Sensor and Surveillance Systems

3650 Woodhead Drive, Northbrook, IL. USA 60062

+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com

Installation and Operation Instructions

Before attempting to connect or operate this product, please

read these instructions completely.

81-IN5406 111913

PB24BB

Battery Backup Multi-Functional Power Box

PB24BB.......... Rugged cast aluminum power box PB24 plus battery backup. Pole mounting clips included

Summary of content (10 pages)

PAGE 1
Installation and Operation Instructions Before attempting to connect or operate this product, please read these instructions completely. PB24BB Battery Backup Multi-Functional Power Box PB24BB..........Rugged cast aluminum power box PB24 plus battery backup. Pole mounting clips included Moog Inc. Sensor and Surveillance Systems © 2013, Moog Inc. All Rights Reserved 3650 Woodhead Drive, Northbrook, IL. USA 60062 +1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Product Warranty Registration Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell. See full warranty details at www.moogS3.
PAGE 4
Limited Warranty for Moog Products Moog - Decatur Operations, subsequently referred to as “Manufacturer,” warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics Five (5) Years Accessory Brackets Five (5) Years Controllers Three (3) Years Power Supplies / IR Illuminators Three (3) Years Poles / PolEvators / CamEvator Three (3) Years Warrior Series™ / Q-View™ Three (3) Years ™ Three (3) Years 6 months
PAGE 5
Electrical Specifications PB24BB English Input Power: 120 VAC/240VAC 1A/.5A Power Consumption: 1Amp (120 Watts) at 120 VAC Power Output: 84 VA at 24 VAC 52 Watts Heater/Blower 32 Watts Camera Power An all pole main switch with a contact of at least 3mm in each pole shall be incorporated in the electrical installation of the building. Tools Required: .150” Flathead Screwdriver 7/16 Wrench or Socket 9/16 Wrench or Socket Español Energía De Entrada: 120 Consumo De Energía de VAC/240VAC 1A/.
PAGE 6
1 2 Wall Mounting: Attach unit securely with (4) 3/8” or 8mm hardware (not supplied). • La pared que monta la caja de la energía es posible, pero el hardware no es incluido. • Le mur montant la boîte de puissance est possible, mais le matériel n'est pas inclus. • Die Wand, die den Energie Kasten anbringt, ist möglich, aber die Kleinteile sind nicht enthalten. • A parede que monta a caixa do poder é possível, mas a ferragem não é incluída.
PAGE 7
4b INPUT: (120VAC or 240VAC) 5b 220-240VAC INPUT 110-120VAC INPUT 240Vac 120Vac Input Input Main Switch Line (L) and Neutral (N) wires should be connected as marked on the board and plugged into the corresponding voltage for the input single phase. Los alambres de la línea (l) y del hilo neutro (n) se deben conectar según lo marcados en el tablero y tapados en el voltaje correspondiente para la monofásico de la entrada.
PAGE 8
7 The battery backup system is designed to be used only with 12VDC Cameras. 8 When used with the FDW75C2N or RHW75C2N remove Dome from housing. • El sistema de reserva de batería se diseña para ser utilizado solamente con las cámaras fotográficas 12VDC. • Cuando está utilizado con el FDW75C2N o el RHW75C2N quite la bóveda de la cubierta. • Le réseau de réserve de batterie est conçu pour être employé seulement avec les appareils-photo 12VDC.
PAGE 9
6 7 5 4 3 2 1 7 N/S IPRS01 IP Reset Replacement Battery Battery Bracket RP70BAT1214 Battery Charger Curcuit RP70TVLSMP3 RPVL3085 RP70TRAN11
PAGE 10