Specifications

LEDS AND SWITCHES

•RATE: A Bi-Color LED to display the rate and shape of the LFO wave as well

as the source of control.

•MIDI: A Bi-Color LED to display the presence of MIDI control.

•LEVEL: A Bi-Color LED to display the level if the input signal post drive control

for optimum processing level.

•BYPASS: A Bi-Color LED to indicate if the effect is engaged or not.

•TAP TEMPO: A rugged smooth-acting stomp switch for setting LFO rate.

•BYPASS SWITCH: A rugged smooth-acting stomp switch bypassing the unit

with a buffered input.

BACK PANEL FEATURES

•AUDIO IN: 1/4” phone jack - accepts any instrument-level to line-level

audio signals.

•LEFT / MONO AUDIO OUT: 1/4” phone jack 1/4” phone jack with adjustable

output level for instrument or line-level output.

•RIGHT / Stereo OUT: A Second output dip switch configurable for either

Stereo out (two types), Delay only out, or dual mono out.

•FEEDBACK, TIME, LFO RATE, MIX, LFO AMOUNT all of which are stereo

1/4” jacks that accept Moogerfooger EP-2 (or equivalent) expression pedals,

or 0-5V control voltages from either two-circuit or three-circuit 1/4” jacks.

•FEEDBACK INSERT: A 1/4” TRS Insert jack for inserting effects in the feedback

loop of the delay chain. Line-level output.

•MIDI IN: A 5 Pin DIN input for controlling the MF-108 via MIDI.

•+9V POWER INPUT JACK - accepts standard 9 volt center positive barrel

power adaptor (power adaptor included). 300mA minimum required.

General Specifications

•CASE: Rugged steel case with black powder coat panel, white silk screen

and hardwood sides for a classic analog appearance.

•DIMENSIONS: 9” x 6” x 2-1/2”

•NET WEIGHT: 4 lbs.

•SHIPPING WEIGHT: 6 lbs, including power adaptor and instruction manual.

•POWER REQUIREMENTS: 105-125 volt, 3W. 220 volt power adaptor available

on special order.

Note: Specifications subject to change without notice.

Moog®, Moogerfooger®, and are registered trademarks of Moog Music Inc.

NC 28801 Phone: (828) 251-0090 Email: info@moogmusic.com WEB SITE: