Product specifications

SPECIFICATIONS
Model Description
SPVO50 Coax Video Surge Protection (BNC CONNECTOR)
Reliable protection Small package Easy to install
SPECIFICATIONS
Model Description
SPVP110 110Vac power surge protection
SPECIFICATIONS
Model Description
SPVRJ01 Data / power over ethernet power / data surge protection
Video Accessories – Additional Accessories
www.moogS3.com
PRODUCT OVERVIEW
Extend the life of your electronics, with a surge protector from Moog, the rst line of defense when keeping your equipment safe from surges. surge protection lowers the
potential for over-heating and frying. Radio frequency interference (RFI) and other forms of electrical interference, such as surges and spikes, are a very common problem in
the security industry. Low level signals such as closed-circuit television and associated data links are extremely susceptible to even small disruptions. Our surge protectors
employ semiconductor clamping devices which protect against spikes and surges.
80
Surge Protection
Surge Protection
Mechanical Specications
Video Input:
This protects the video line to the camera by means of fast acting diode clamps
Maximum Video Level:
5.0 Volts/1.0 Volt is normal
Line to Shield Current (Max.):
3000 Amps
Response Time:
1.0 Picosecond
Shield to Ground Current (Max.):
6500 Amps
Frequency Response:
DC to 12 MHz
24Vac Power Input:
Protects camera and Pan / Tilt power
Input Voltage (Max.):
40 Volts
Maximum Current:
3.0 Amps
Normal Operating Current:
2.0 Amps
Maximum Surge Current:
4000 Amps
Response Time:
1.0 Picoseconds
Interference Filter:
100 kHz to 25 MHz (noise)
Differential Mode Attenuation:
50.0 dB
Common Mode Attenuation:
30.0 dB
Control Line Input:
Protects 2 wire control line for Pan / Tilt.
Maximum Signal Level
AC:
16 Volts - RS-232 has a Voltage of ± 15 Volts
DC:
25 Volts
Maximum Surge
Current
Differential Mode:
2000 Amps
Common Mode:
4000 Amps
Response Time:
5.0 Nanoseconds
Frequency Response:
DC to 3 MHz
SPVO50 SPVP110 SPVRJ01