Product specifications

Camera Enclosures – Dome
www.moogS3.com
PRODUCT OVERVIEW
The SuperDome is a general purpose dome camera housing. This unit is available with either a 12” or 16” dome and
comes with a pendant mount. It features a ¼” UV rated, ABS plastic upper dome and a 1/8” cell-cast acrylic lower dome.
The 12” model allows two xed cameras, the 16” unit allows for three cameras.
PRODUCT SPECIFICATIONS
Available Features
• Available with clear or tinted dome
• Optional inner liner available
• Security fasteners standard equipment
• Houses single or multiple xed cameras
• Optional Heater / Blower
72
SuperDome
SuperDome
SPECIFICATIONS
Models Description
SDP12CHB
12” outdoor / indoor fixed camera dome housing. Includes 1 fixed camera bracket; can accommodate up to 2 full-body fixed cameras (FM2).
Security fasteners, optional pendant mount, Heater / Blower (included in outdoor models), MCL 7”-8”
SDP16C
16” outdoor / indoor fixed camera dome housing. Includes 1 fixed camera bracket; can accommodate up to 2 full-body fixed cameras (FM2).
Security fasteners, optional pendant mount, MCL 10”
SDP16CHB
16” outdoor / indoor fixed camera dome housing. Includes 1 fixed camera bracket; can accommodate up to 2 full-body fixed cameras (FM2).
Security fasteners, optional pendant mount, Heater / Blower (included in outdoor models), MCL 10”
GENERAL
Power Source: 24Vac
Power Consumption: 52vA (camera not included)
Pan / Tilt Power Consumption: 16vA (Max.) - .625 Amps P/T
Maximum Load: 5 lbs. balanced
Weight: 3.25 lbs. (1.47 kg.)
Each unit in the SuperDome™ general purpose, outdoor housing series shall be equipped with a pre-attached, optional pendant mount, and shall be available with either a 12”or 16” clear or tinted
(1 F-stop light reduction) lower dome made from 1/8” cell-cast acrylic. The upper dome shall be ¼” ABS plastic. Optional items shall include: 24Vac, 2.08 Amp heater and surge protector; 24Vac,
16 Amp blower and surge protector, or Heater / Blower combination; 355 integral pre-wired 12° per second.
Moog specializes in housings for xed, multi-camera applications. These congurations offer an inexpensive alternative to Pan / Tilts. The SuperDome
™
offers:
• Ability to accommodate up to 3 xed cameras:
SDP12 MCL: 8” for 1 camera / 7” for 2 cameras
SDP16 MCL: 12” for 1 camera / 8” for 2 cameras / 7” for 3 cameras
• Adjustable viewing in many directions
• Easy Installation
NOTE: If the application calls for more than one camera in the unit, an additional FM1 bracket will be needed for each additional camera.