Product specifications
Camera Enclosures – Box
www.moogS3.com
PRODUCT OVERVIEW
The BMT10 unit by Moog is a bullet-resistant environmental camera housing featuring a 7-gauge steel body and is
designed to meet or exceed Level III protection per UL standard 752. An integrated tilt bracket protects all wiring and
allows for surface mount applications, plus an innovative camera sled allows the camera to be rotated 360° within the
housing to allow for any mount position.
PRODUCT SPECIFICATIONS
Available Features
• Accepts many lens and camera combinations
up to 10”
• SP-1250 Lexgard® viewing window, with a
Window Guard
™
paint shield
• Rotating camera sled allows the housing to be
mounted at any angle
• Constructed from 7-gauge steel for strength
and durability
66
BMT10
BMT10
• Durable, heat reective, white powder-coat nish
• Thermostatically controlled heater standard
• Integrated tilt bracket to protect wiring
• Designed to meet IP65 standards
• Optional sunshield
• US Patent No. 6,375,369 B1
SPECIFICATIONS
Models Description
BMT10C
Steel Bullet-Resistant Outdoor housing with Window Guard
™
paint shield, plus 115Vac Heater / Thermostat (Level III)
BMT10C2
Steel Bullet-Resistant Outdoor housing with Window Guard
™
paint shield, plus 24Vac Heater / Thermostat
BMT10C3
Steel Bullet-Resistant Outdoor housing with Window Guard
™
paint shield, plus 220/240Vac Heater / Thermostat
Tough enough to stop a .44 Magnum bullet
GENERAL
Dimensions:
6.74” x 4.52” x 13.74”
Power Source
BMT10C BMT10C2 BMT10C3
120Vac, 50/60Hz, 28 VA 24 Vac, 50/60Hz, 28 VA 230Vac, 50/60Hz, 28 VA
The ballistic-rated environmental housing shall be constructed from 4.50” diameter steel tubing with a .23” thick wall, and shall include a thermostatically controlled heater. Front end plate shall be made from 7-gauge
steel. The viewing window shall be constructed from SP-1250 Lexgard®, 1.25” bullet-resistant plastic with a vandal resistant guard, and shall be bolted to the front end plate. The internal camera bracket, which will
rotate 360° inside the housing, shall allow the housing body to be mounted on any angled surface. The enclosure shall have an integrated tilt bracket that protects wiring and also allows for surface mount applications.
An optional .090” thick aluminum sunshield will be available. Both the housing and sunshield shall have a heat- reflective, white powder coat finish
Window Guard Paint Shield
™
:
Our exclusive Window Guard
™
paint shield protects housing windows from vandals using spray paint or paint ball guns.