Product specifications
Camera Enclosures – Box
www.moogS3.com
PRODUCT OVERVIEW
The professional grade outdoor Fusion Camera Housing with Thermiq Technology is designed to keep advanced IP xed
cameras operating at top performance. A major threat to outdoor cameras is heat. Today’s IP cameras generate a lot of
heat and radiation from the sun is a substantial contributor as well. A typical outdoor camera system may operate in an
ambient temperature of 105°F (40°C), but the temperature inside the camera can be 120°F (50°C) or higher. Over time
high temperatures reduce the performance of the camera and can lead to premature failure.
Moog Engineers developed Thermiq Technology, a technologically advanced yet simple and effective solution to combat
camera heat. Unlike other camera cooling solutions on the market, Thermiq Technology requires very little power and
maintains the camera enclosure’s rugged IP66 rating while ensuring that heat does not build up in the camera. By owing
warm internal air and cool external air over a heat sink designed for maximum efciency, heat generated by IP camera
electronics and sun radiation is eVacuated from the housing. Thermiq Technology removes up to 75% of heat generated
by the camera and solar energy, keeping the internal housing temperature closer to ambient.
Intuitive design also played a key role in the formation of the Fusion Line. Smart features include: a side hinge that allows
for easy camera servicing and setup; a camera mounting sled that snaps into the housing for simple and secure camera
installation; a strategically placed heater that defogs the housing window and lens for clear viewing; and a heavy-duty
feed through wall / pole mount with conduit input for clean aesthetics. Available with 24Vac / 12Vdc input or Moog PoE
plus with (Patent Pending) Dynamic Power Allocation (DPA) technology. There’s a Fusion model ideal for your particular
surveillance application.
PRODUCT SPECIFICATIONS
Available Features
• Meets NEMA Type 4 and IP66 standards
• IK10 impact rated
• Thermostatically controlled blower
• Standard wall / pole mount
• Accommodates wide-angle lenses up to 135º
• Fits most xed camera / lens combinations
59
Fusion Camera (Thermiq)
Fusion Camera Housing (Thermiq)
SPECIFICATIONS
Part Numbers Description
FCH11C2WQ Environmental housing with heat exchanger, feed-thru wall / pole mount 24Vac or 12Vdc input, Heater / Blower, adjustable sunshield
FCH11C8WQ PoE input, with DPA, supports IEEE802.3af cameras, 30 watt midspan included, heater/ blower, adjustable sunshield
FCH11C4WQ 24Vac input, output 802.3af PoE for the camera, Heater / Blower, adjustable sunshield
FCH11C4WQ-MM 24Vac input, output 802.3af PoE for the camera, Heater / Blower, adjustable sunshield with MSA compliant multi-mode fiber-optic transceiver
FCH11C4WQ-SM 24Vac input, output 802.3af PoE for the camera, Heater / Blower, adjustable sunshield with MSA compliant single-mode fiber-optic transceiver
GENERAL
Dimensions: 19.2” x 6.1” x 11.1” (488 x 155 x 282mm)
Max. Camera Length: 11” (280mm)
Weight: 5.3 lbs
Blower (Internal): Yes (Continuous)
Heater Activates At: 60°F (15.5°C)
Heater Deactivates At: 80°F (27°C)
Power Consumption: 24Vac: 30 watts: Heater / Blower 12Vdc: 13 watts: Heater / Blower PoE: 30 watts: Camera, Heater / Blower
Maximum Windload: 150mph (240kph)
Construction Body and Top: Polycarbonate
Mounting Bracket Construction: Cast aluminum
Input Voltage / Power Input: 24Vac, 80W