Product specifications

Furnace – Camera Enclosures
www.moogS3.com
PRODUCT OVERVIEW
Camera Snout Housing with Direct Nitrogen Cooling Installed with Camera, Lens and Lighting
PRODUCT SPECIFICATIONS
Available Features
• Controllable light intensity
• Complete build in ange ND-200 to adjust to already existing ange at site
47
FK-G-N-L-320-250-L
FK-G-N-L-320-250-L
SYSTEM COMPONENTS
FK-CM-PTZ-3613
1/3” DSP-Color / Monochrome-CCD-Camera with Automatic Iris Control
Sensor: 1/3” CCD-Sensor
Scanning Area: 0.2” x 0.1” (4.8 x 3.6mm)
Picture Elements (H x V): 752 x 582
Sensitivity: 3 lux (gain minimum)
Resolution (H x V): 450 lines x 415 lines
Scanning: 625 lines CCIR, PAL / NTSC
Signal / Noise Ratio: 48dB (22dB at AGC 32dB)
Electronic Shutter: Adjustable from 1/50 - 1/50 000/sec., In 9 steps
Integration: 2 to 510 elds available using menu selection, with option “picture freeze”
Video Output: PAL / Composite, S-Video over AUX-Connector only by DC-Lenses
White Balance: Manual / automatic 2.500 - 9.500 K
Back Light Control: Digital zoom, pan, scroll, rotate, freeze
Switchable: Color bars, color, monochrome
AGC: 32dB
Serial Communications: RS-232C, 19.200 baud
One Cable Connector: Provides power, video and control
Power Requirement: 12Vdc
FRO-13-ZF-3307
Special Zoom Lens
Horizontal: 27° - 5°
Vertical: 20° - 4°
FC-Z-3307
Focus Control For Zoom Lens with End Switch and Motorized to use the Function from Control Desk
WUL-320-250-E
Camera Protective Housing for Nitrogen Cooling System
TBM-051
Temperature Monitoring Element, Switch Point: 50°C (122°F)
Contact Function:
1 opener by increase of temperature with BUK-2-01-2-pin female connector, with AST-2-01-2-pin male connector, includes 9.8” (250mm)
connecting cable
Controllable Light Intensity
Complete Build in Flange Nd-200 to Adjust to Already Existing Flange at Site