Product specifications

Pan & Tilt Positioners
www.moogS3.com
41
PRODUCT OVERVIEW
Designed and built for the harshest mobile or stationary environments, the Taurus
™
enables simple integration into
existing systems and various platform mounting congurations. The Taurus-R
™
supports radar or other payloads
that can be positioned independently from the pan and tilt.
PRODUCT SPECIFICATIONS
Available Features
• Balanced payload stationary: up to 300 lbs total,
balanced on-axis, up to 150 lbs per side
• Balanced payload mobile: up to 150 lbs total,
balanced on-axis, up to 75 lbs per side
• Stationary or mobile installations
• Mil-Spec connectors
• Marine conguration that meets IP-67 standard
• Universal wiring for sensor integration
• Thermostatically controlled heaters
• Connector (Base): 43-Pin
• Connector (tilt axis): 26-Soc
• RF pass-through turret
• 4 payload connectors (2 per side)
Sensor Integration
• Radar antenna systems
• Multi-Spectrum cameras
• IR and visible illuminators
• Laser range nders
• Communication antennas
• Acoustic devices
SPECIFICATIONS
Part
Number
Conguration
Load Mount/
Interface
Nominal
Voltage Vdc
Communication
Interface
Control
Protocol
Rotation Speeds* Rotation Range
Repeatability
Pan & Tilt
Pan Tilt Pan Tilt
7-53400 ICMS CR (Taurus) Universal 24 Serial / IP PTCR-96 / Pelco D .005 - 30°/sec .005 - 30°/sec. Continuous 180°(± 90°) 0.05°
7-53450 ICMS CR (Taurus-R) Universal 24 Serial / IP PTCR-96 / Pelco D .005 - 30°/sec .005 - 30°/sec. Continuous 180°(± 90°) 0.05°
7-54800 ICMS CR HS (Taurus) Universal 48 Serial / IP PTCR-96 / Pelco D .005 - 45°/sec .005 - 45°/sec. Continuous 180°(± 90°) 0.05°
7-54850 ICMS CR HS (Taurus-R) Universal 48 Serial / IP PTCR-96 / Pelco D .005 - 45°/sec .005 - 45°/sec. Continuous 180°(± 90°) 0.05°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
* Maximum speed depends upon payload conguration
Taurus
™
Taurus-R
™
Taurus/Taurus-R Series
Taurus/Taurus-R Series