Product specifications
Pan & Tilt Positioners
www.moogS3.com
38
PRODUCT OVERVIEW
The QPT-RF Series of pan and tilts employ RF Rotary Joint technology for management of radio frequency signals.
These rugged antenna positioners support a wide range of antenna sizes, frequency bands, and up to 3 isolated
channels of RF pass-through signals. Auxiliary sensor loads, such as visible and/or thermal cameras, can be
mounted with the antenna and are completely supported. Applications include: UAV tracking/telemetry, satellite
communications, radar, GPS, and many others.
All RF, video, power, and control data cables are pass-through to eliminate cables in motion with the pan and tilt
making cable management simple, neat, and safe. IP, RS-232 and RS-422, Pelco D, serial control of the pan and
tilt, and sensors are standard. Serial data and lens controls provide plug and play camera load interfaces.
PRODUCT SPECIFICATIONS
Available Features
• Supports antennas from man-portable up to 3-meters.
• Mulitiple RF channel pass-through from DC up to
18 GHZ.
• Auxilliary payload support (cameras, laser range
nders, laser designator, GPS, etc.)
• Network ready
• Connector (base): 43-Pin
• Connector (tilt axis): 26-Soc
• Connector (RF) all N-Type
Sensor Integration
• Antennas
• Multi–Spectrum cameras
• Thermal imagers
• IR and visible illuminators
• Laser range nders
SPECIFICATIONS
Part
Number
Conguration / Channel
Load
Mount/
Interface
# RF
Channels
Nominal
Voltage
Vdc
Communication
Interface
Control
Protocol
Rotation Speeds* Rotation Range
Repeatability
Pan & Tilt
Pan Tilt Pan Tilt
QPT-50 (lb-ft torque)
7-61BRFA-18G IC -RF I 18GHz/Single FT-A 1 24 Serial / IP PTCR-20/Pelco D 1.7 - 25°/sec. 0.3 - 7°/sec. Continuous 180°(± 90°) 0.25°
7-61BRFB-18G IC -RF I 18GHz/Single FT-B 1 24 Serial / IP PTCR-20/Pelco D 1.7 - 25°/sec. 0.3 - 7°/sec. Continuous 180°(± 90°) 0.25°
7-61RFA-18G ICMS -RF I 18GHz/Single FT-A 1 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-61RFB-18G ICMS -RF I 18GHz/Single FT-B 1 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-62RFA-1816G ICMS -RF II 18/16GHz HBW/ Dual FT-A 2 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-62RFB-1816G ICMS -RF II 18/16GHz HBW/Dual FT-B 2 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
QPT-90 (lb-ft torque)
7-71RFA-18G ICMS -RF I 18GHz/Single FT-A 1 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
7-71RFB-18G ICMS -RF I 18GHz/Single FT-B 1 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
7-72RFA-184G ICMS -RF II 18/4GHz HP/Dual FT-A 2 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
7-72RFB-184G ICMS -RF II 18/4GHz HP/Dual FT-B 2 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
7-73RFA-333G ICMS -RF III 3/3/3GHz/3 Channel FT-A 3 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
7-73RFB-333G ICMS -RF III 3/3/3GHz/3 Channel FT-B 3 24 Serial / IP PTCR-96/Pelco D .005 - 25°/sec. .005 - 8°/sec. Continuous 180°(± 90°) 0.05°
QPT-500 (lb-ft torque)
7-51RFU-18G ICMS -RF I 18GHz/Single Univ. 1 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-52RFA-1816G ICMS -RF II 18/16GHz HBW/Dual FT-A 2 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-52RFB-1816G ICMS -RF II 18/16GHz HBW/Dual FT-B 2 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-52RFU-184G ICMS -RF II 18/4GHz HP/Dual Univ. 2 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-52RFU-1816G ICMS -RF II 18/16GHz HBW/Dual Univ. 2 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-53RFU-333G ICMS -RF III 3/3/3GHz/3 Channel Univ. 3 48 Serial / IP PTCR-96/Pelco D .001 - 20.°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
FT – Formed Tabletop
* At stated load capacity and nominal voltage
QPT-RF Series
QPT-RF Series