Product specifications

PRODUCT OVERVIEW
The QPT 200 and 500 Series of pan and tilts are rugged and durable enough for virtually any environment.
The QPT-200 and QPT-500 can handle payloads up to 200 or 500 lb-ft of torque, respectively, making each
suitable for a wide range of sensors.
Integrated Control (IC) units can communicate via networked PC or separate controller. The Sentry line takes our products
to the next level by integrating stepper motors into the design for higher accuracy and speed control.
PRODUCT SPECIFICATIONS
Available Features
• Heavy duty payloads up to 200 and 500 lb-ft
• Digital Serial Integrated Control (IC) models
• Internal wire tabletop for pass-through or IC sensor
wiring on certain models
• Fixed, inverted or mobile installations
• Mil-Spec connectors
• Tough metal housing and gearing for durability in
harsh environments
• Marine conguration that meets IP-67 standard
• Models available with RF pass-through connectivity
(RF rotary joint, 1-3 channels)
• Connector (base): 43-Pin
• Connector (tilt axis): 26-Soc (1 or 4)
Sensor Integration
• Multi-Spectrum cameras
• Thermal imagers
• IR and visible illuminators
• Laser range nders
• Communication antennas
• Acoustic devices
Pan & Tilt Positioners
www.moogS3.com
SPECIFICATIONS
Part
Number
Conguration
Load Mount/
Interface
Nominal Voltage
Vdc
Communication
Interface
Control
Protocol
Rotation Speeds* Rotation Range
Repeatability
Pan & Tilt
Pan Tilt Pan Tilt
QPT-200 IC Series
7-4100A ICS FT-A 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4100B ICS FT-B 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4200A ICMS FT-A 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4200B ICMS FT-B 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-42000 ICMS Universal 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4300A ICMS CR FT-A 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-4300B ICMS CR FT-B 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-43000 ICMS CR Universal 24 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
QPT-500 IC Series
7-4400A ICS FT-A 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4400B ICS FT-B 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4500A ICMS FT-A 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4500B ICMS FT-B 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-45000 ICMS Universal 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. 420°(± 210°) 180°(± 90°) 0.1°
7-4600A ICMS CR FT-A 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-4600B ICMS CR FT-B 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
7-46000 ICMS CR Universal 48 Serial / IP PTCR-96/Pelco D .001 - 20°/sec .001 - 4°/sec. Continuous 180°(± 90°) 0.1°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
FT – Formed Tabletop
* At stated load capacity and nominal voltage
200/500 Series ICMS Model
36
QPT-200 and 500 IC Series
QPT-200 and 500 IC Series