Product specifications
Camera Systems – Fixed Network / Analog
www.moogS3.com
PRODUCT OVERVIEW
The Moog QView
™
camera system provides you with the advantages of a multi-camera system in one discrete housing. Up to
four cameras are mounted to fully articulated, segmented arm brackets which can be adjusted to t a wide range of viewing
angles; all without the use of Pan / Tilt devices, controllers, or motors. The QView system is an ideal solution for monitoring
multiple areas on a budget.
PRODUCT SPECIFICATIONS
Available Features
• Multiple cameras in a single dome take up less geography
than multiple cameras in multiple locations
• One housing to install (rather than three or four) saves money
on the initial installation and any future service calls
• Fixed cameras require little servicing and use the least amount
of hard drive space
• With multiple xed cameras you can capture continuous footage
versus monitoring one direction at a time with a single PTZ camera
• Industry leading three-year warranty
• Up to four Day / Night (D&N) cameras with IR
corrective lens
• Available with NVT (Network Video Technologies’)
twisted pair video outputs
• Factory installed system, ready to plug n’ play
15
QView
QView
QFD
QRH
SPECIFICATIONS
Models Description
QFDPT2-70NA Standard 7” outdoor, pendant mount, tinted dome, with (2) D&N cameras, 3.3-12mm auto-iris lens
QFDPT4-70NA Standard 7” outdoor, pendant mount, tinted dome, with (4) D&N cameras, 3.3-12mm auto-iris lens
QRHPT2-70NA Vandal Resistant housing, pendant mount, tinted dome, with (2) D&N cameras, 3.3-12mm auto-iris lens
QRHPT4-70NA Vandal Resistant housing, pendant mount, tinted dome, with (4) D&N cameras, 3.3-12mm auto-iris lens
GENERAL
Image Sensor: 1/3” Interline transfer CCD (Sony HAD IICCD)
Horizontal Resolution: 600 TVL
Minimum Illumination: 0.28 lux
White Balance: Auto
Iris Control:: Auto
QView Camera Features / Options:
After selecting the appropriate housing, choose your camera features
Quantity of Cameras (2, 4):
All QView™ housings are capable of holding up to 4 cameras. Simply identify the number of areas you would like to
monitor, and select the amount of cameras in correspondence. If you need 3 cameras order a model with 2 and purchase
an additional camera module. The camera arms are fully adjustable and designed to prevent movement once positioned.
Twisted Pair (X2):
Depending on your needs, the QView system is available with an optional twisted pair conguration. Just add “–X2” to the end of the
part number.