Product specifications

Camera Systems – HD Camera Accessory
www.moogS3.com
14
EX-VD1 -Video Decoder
EX-VD1 -Video Decoder Appliance
PRODUCT SPECIFICATIONS
Available Features
• Standard denition video output (BNC)
• High denition video output (HDMI)
• Easily integrate the decoder appliance into your existing video management solution through the Open API
• Ability to decode video provided by any H.264 compliant video source
• Can be combined with the EXO Series of cameras for point-to-point applications
High Quality Video Decoding:
Video is de-compressed to a high quality, high denition digital format using the HDMI connector for digital video
out. For analog video, the BNC connector outputs to a standard denition NTSC / PAL component video format.
Quad View:
The EX-VD1 has the ability to simultaneously decode and display up to 4 high quality H.264 streams to a quad
view on the HDMI or BNC output.
Secure:
Built-in encryption capability enables support for encrypted data communication channels and secured
administrative interfaces.
Audio and Alarm Outputs:
Audio output and Alarm outputs, allowing unit to be paired with EXO Series of cameras for point to
point applications.
Power Over Ethernet:
The installer-friendly EX-VD1 is powered over Ethernet (PoE) according to IEEE 802.3af which eliminates the
need for power outlets.
Easy to Manage:
The Moog EX-VD1 GUI-based web interface makes set-up and management of the appliance nearly effortless.
In addition, integration of the EX-VD1 into new or existing video management software is simple thanks to the
intuitive Open API. The Open API exposes management and streaming functions through standard HTTP and
RTSP interfaces and is supported by major NVR vendors.
Standard / Integrated Interfaces Specications
Video Out:
HDMI Connector for digital video and audio
BNC Connector for analog composite video
Audio In: Single analog audio input connector (3.5mm)
Audio Out: Single analog audio output (3.5mm)
Network:
Standard 10/100 Base-T Ethernet port half / full duplex,
auto-sensing, RJ-45
Alarm Out: One closure contact (terminal bloc)
Relay In: Two input relay contacts (terminal bloc)
COM Por: Single serial port (RS-422/485) (terminal bloc)
Protocols Specications
Networking: IPv4/v6, UDP, TCP, IGMP, ICMP, ARP, DHCP, DNS
Streaming: RTP, HTTP
Management: RTSP, HTTP, HTTPS, Bonjour, NTP, Telnet, FTP
Video Compression Specications
Standards: H.264 High, Main and Baseline proles Motion JPEG
Data Rate:
64 kbps – 6 Mbps per channel SD
(H.264 requires less than 1 Mbps @ 4CIF/30fps)
256kbps – 8 Mbps per channel HD
(H.264 requires less than 2 Mbps @ 1280 x 960)
Resolutions:
Analog 500 TV Lines
HD 1080i/p lines Interlacing / Progressive
1920 Columns
(540 lines per eld-60
Fields/sec = 30 Frame/sec
720p lines Progressive
1280 Columns
60 frame/sec
General Features Specications
System Administration: Web GUI interface (HTTP(s))
Programming Interface: ONVIF Prole S, open API for software integration
System Monitoring:
Video signal, storage subsystem, power supply,
temperature, network monitor
Software Update: Fault-tolerant, remote accessible
Alarm Events: Triggered by external input or internal event monitoring
Mechanical / Environmental Specications
Dimensions: 3.66 x 1.10 x 3.21”
Power: 12Vdc on terminal block or PoE
Operating Temperature: -10°C to 60°C
Approvals: FCC, CE
Audio Specications
Standards: Uncompressed PCM High-delity AAC-LC G.711