Specifications

MN00178 1359
SECTION IV TEST SOFTWARE
SOFTWARE SETUP
Moog Conguration Tool
By factory default, the Moog EXO Camera is congured in DHCP. If you are not using a DHCP server it will automatically allocate itself an APIPA (Automatic Private IP Ad-
dressing) address in the range 169.254.0.1 to 169.254.255.254 with subnet mask 255.255.0.0.
Initial device network conguration is done via the Moog Discovery Tool (MDT), a tool provided by Moog that can be found on the company’s web site and on the CD-ROM
or ash drive supplied with each camera system. The ash drive also contains a copy of Microsoft Silverlight 5. Both programs should be installed on the local server.
The MDT plays 3 important roles:
1. Discovery of all Moog EXO Cameras
2. Allows for remote conguration of the IP address and subnet mask
3. Permits batch rmware upgrade of all common EXO devices
Note: Silverlight is a free plug in and is required to interface with the Moog EXO Web brower. Once your device is installed on your network and powered up, launch MDT
from any computer on the network and the following window will be displayed:
The MDT supports 2 ways to discover a device. The rst way doesn’t need any conguration and uses the Bonjour discovery protocol. In order to be able to discover a device
via Bonjour, the network must support multicast delivery.
If it is not the case, you can use the second way, which is the Unicast Discovery. The Unicast Discovery can be congured by using the “Unicast Discovery” conguration
form. This conguration form is available via the Admin / Unicast Discovery menu option.
By factory default, the Moog EXO GeminEye™ system is congured in DHCP. If you are not using a DHCP server it will automatically allocate itself an APIPA (Automatic
Private IP Addressing) address in the range 169.254.0.1 to 169.254.255.254 with subnet mask 255.255.0.0.
Initial device network conguration is done via the Moog Conguration Tool (MCT), a tool provided by Moog supplied on a CD-ROM that accompanied the product with each
GeminEye system, and that can be found on the company’s web site.
The MCT plays 3 important roles:
1. Discovery of all Moog EXO GeminEye systems and EXO Cameras
2. Allows for remote conguration of the IP address and subnet mask
3. Permits batch rmware upgrade of all common EXO devices
Once your device is installed on your network and powered up, launch MCT from any computer on the network and the following window will be displayed:
The MCT supports 2 ways to discover a
device. The rst way doesn’t need any
conguration and uses the Bonjour
discovery protocol. In order to be able to
discover a device via Bonjour, the network
must support multicast delivery.
If it is not the case, you can use the
second way, which is the Unicast
Discovery. The Unicast Discovery can be
congured by using the “Unicast Discovery”
conguration form. This conguration form
is available via the Admin / Unicast
Discovery menu option.